Pci/Plug And Play Setup Page - ECS Motherboard User Manual

PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the
PCI bus and those utilizing the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Share Memory Size
Primary Graphics Adapter
Allocate IRQ to PCI VGA
PCI IDE BusMaster
Plug and Play Aware O/S
Enable this item if you are using an O/S that supports Plug and
Play such as Windows 95/98/ME.
Share Memory Size
This item lets you allocate a portion of the main memory for the
onboard VGA display application with 16/32/64MB options.
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the PCI
or the AGP bus. The default PCI setting still lets the onboard
display work and allows the use of a second display card
installed in an AGP slot.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We
recommend you to leave this item at the default value.
Chapter 3: BIOS Setup Utility
Yes
32MB
PCI
Yes
Disabled
ESC:Quit
F1:Help
F5:Old Values
F6:Load BIOS Defaults
F7:Load Setup Defaults
29
:Select Item
PU/PD/+/-:Modify
(Shift)F2:Color