HP Compaq nc6400 Maintenance And Service Manual page 150

Removal and Replacement Procedures
Description
Wireless Antenna Kit
24. If it is necessary to replace the wireless antenna transceivers
and cables, remove the two Torx T8M2.5×4.0 screws 1 that
secure the left and right transceivers to the display enclosure.
25. Remove the wireless antenna cables 2 from the clips in the
display enclosure.
26. Detach the wireless antenna transceivers 3 from the display
enclosure.
27. Remove the wireless antenna transceivers and cables.
Removing the Wireless Antenna Transceivers and Cables
Reverse the above procedure to reassemble and install the
display assembly
5–54
Display Assembly Components
Spare Part Number Information
Maintenance and Service Guide
Spare Part
Number
418899-001