1. Prepare the computer for disassembly
2. Position the computer with the front toward you.
3. Loosen the Phillips PM2.0×5.0 screw 1 that secures the
Mini Card module compartment cover to the computer.
4. Lift the front of the cover 2 and swing it up and toward
the back of the computer.
5. Remove the Mini Card module compartment cover.
✎
The Mini Card module compartment cover is included in the
Plastics Kit, spare part number 418877-001.
Removing the Mini Card Module Compartment Cover
Maintenance and Service Guide
Removal and Replacement Procedures
(Section
5.3).
5–19