Table of Contents
Advertisement
LOAD
Changing your iStomp pedal takes less than a minute.
1.
Connect your iOS device to the iStomp.
2.
In the My Pedals view of the app, select the pedal that you want to download.
3.
Tap the LOAD
The download takes approximately 30 seconds.When complete, the pedal will be in a bypassed
state.You can then turn on the effect and begin using it. *
*Note: After the download has completed, it is recommended to turn all knobs fully counter-
clockwise before turning the effect on, after which you can then enable the effect and adjust the
knobs to the desired settings.
button and confirm downloading the pedal.
19
Advertisement
Table of Contents
