Advertisement
HOW TO STOP THE PYROLYSIS CYCLE
I I
1.
Turn the function selector to 0 (oven OFF)
■ If the oven cavity temperature is higher than
300 °C
1a do•Lo (door locked) appears steadily on the program-
mer display.
1b When the oven cavity temperature drops below
300°C:
•
the time appears on the programmer display
again;
•
the key pilot light goes out;
•
the door unlocks.
1a
■ If the oven cavity temperature is lower than 300 °C
1c The time appears on the programmer display.
1d After a technical time:
1b
•
the key pilot light goes out;
•
the door unlocks.
ACCIDENTAL
PYROLYSIS CYCLE
2.
The function selector has been turned to any co-
oking function
■ If the oven cavity temperature is higher than
300 °C
2a do•Lo (door locked) appears steadily on the program-
mer display.
2b When the oven cavity temperature drops below
300°C:
•
P0•00 appears with P flashing;
•
the key pilot light goes out;
2a
•
the door unlocks.
2c To reset normal conditions turn the function selector
to 0 (oven OFF). The time appears on the program-
2b
mer display.
■ If the oven cavity temperature is lower than 300 °C
2d The time appears on the programmer display, or the
oven cavity temperature (caution: in this case the he-
2c/d
ating elements are working).
2e After a technical time:
•
the key pilot light goes out;
2d
•
the door unlocks.
2f
To reset normal conditions turn the function selector
to 0 (oven OFF). The time appears on the program-
mer display.
INTERRUPTION
OF
THE
25
Advertisement
