Advertisement
PROGRAMMER
MESSAGE
variable
I I
MESSAGE MEANING
Cooking time set or oven tempe-
rature measured by the internal
sensor.
A temperature below 50°C has
been set.
The oven has switched off.
The audible signal has switched
off after the end of cooking (End).
dEF
= defrost
The "defrosting frozen food" fun-
ction has been set.
End
AUTO
with
flashing and au-
dible signal.
End of the programmed cooking.
00.00
with bell symbol flashing
and audible signal. End of the ti-
mer countdown.
Start of the Pyrolysis cycle.
P0.00
P
with
flashing.
do.Lo
This appears after
se the function selector knob has
been moved from the Pyrolysis
function to a cooking function. The
temperature has dropped below
300°C. The key LED goes out and
the door unlocks.
P0.00
P
with
flashing. The oven
selector knob has been moved to
the Pyrolysis function (
P0.00
AUTO
with
flashing. End
of the pyrolysis cycle. This messa-
ge remains until the door unlocks.
WHAT
TO
To change the cooking temperatu-
re press key 4 of the programmer,
then keys 5 or 6.
Press key 4 of the programmer,
then keys 5 or 6.
Turn the function selector knob to
0
. The time will appear.
To turn the oven off turn the fun-
ction selector knob to
Press any programmer key to si-
lence the audible signal
pears (see specific note).
Turn the function selector knob to
0
.
Press any programmer key to si-
lence the audible signal.
The time appears.
To increase the cycle length, up to
max 3 hours, press key 2 of the
programmer then key 6. To redu-
ce to the minimum 1 hour 30 mi-
nutes press key 2 of the program-
mer and then key 5.
, becau-
Turn the oven selector knob to
and repeat the operations to start
the Pyrolysis cycle.
To start the Pyrolysis cycle press
key 3 of the programmer.
To cancel the operation turn the
P
).
oven function selector knob to
Wait for the door to unlock.
DO
0
.
OFF
ap-
0
0
.
Advertisement
