Major Functions; Ice Making System Cleaning; Control Box - Orien FS-65IM User Manual

5. Mode button: Mainly for service. When this button is pressed, unit can change from Ice
Making mode to Ice Harvest mode, or from Ice Harvest mode to Ice Making mode. You can
judge the mode from the status of the green and yellow LEDs.
6. Ice Size Adjustment Guide:
1.) Press and hold the "Clean" button and the "Mode" button together for at least 3 seconds. The
unit will enter the Ice Size Adjustment mode. The "ICE Making" LED (green) will be blinking
continuously during the ice size adjustment.
2.) While in the Ice Size Adjustment mode, press the "Clean" button or the "Mode" button for the
desired ice size.
Smaller ice setting:
By pressing the "Clean" button, you can decrease the size of the ice cubes. The "ICE FULL"
LED (red) will flash as you lower the ice size and will finally be blinking at the setting of
smallest ice size.
Larger ice setting:
By pressing the "Mode" button, you can increase the size of the ice cubes. The "ICE HARVEST"
LED (yellow) will flash as the larger size is set and will blink when the setting of largest ice size
has been reached.
After 10 seconds without any operation, the unit will automatically memorize the current state
and return to the previous mode.
NOTE: If during the ice size adjustment, the "ICE FULL", "ICE MAKING " and
" ICE HARVEST" LEDS blink all at once, this indicates that the unit is in the default factory
setting of the ice size adjustment.
7. If the red, green and yellow LEDs are flashing together, the machine is not working. The major
fuse of the control box has failed. Call for service.
NOTE: Avoid letting water contact the control box.
1. Completely automatic operating procedure.
2. When the ice storage bin is full of ice cubes, the machine stops working automatically
and starts again after the cubes are removed.
3. The different colors of the LED display indicate various work modes.
4. Indication of failure of major control box fuse.
5. The fan motor responds to the ambient temperature. If it is cold, the motor will stop
working to keep the cooling system in good working condition.
6. Ice cube size is adjustable.
7. A sensitive probe and accurate timer enhance the performance of the ice maker.
8. Manual Clean mode to start or stop the ice making system cleaning.
9. Built-in compressor protection system.

MAJOR FUNCTIONS

25