HP OmniBook 900 Evaluation Manual page 85

11. Press Enter to install Windows NT on the new partition.
12. Select the type of file system to install, then press Enter.
13. Press Enter to accept the default Windows NT directory or type in
14. Press Enter to allow Windows NT setup to examine your hard disk
15. When prompted, press Enter to reboot. (Do not remove the CD-ROM.)
16. Click Next to allow Setup to Gather information about your computer.
17. Choose Typical from the Setup Options, then click Next. (If hard disk
18. Enter your name and organization, then click Next.
19. Enter the 10-digit CD-key, then click Next.
20. Enter a computer name, then click Next. This name is used by other
21. Enter an Administration password twice, then click Next. This
22. Choose No, do not create an emergency repair disk, then click Next.
It is more useful to create a repair disk after installation is complete and
Important
after you have installed your drivers and other applications.
23. Choose Install the most common components, then click Next.
24. Click Next to Install Windows NT Networking.
25. Choose Do not connect the computer to a network at this time, then
We recommend that you install Windows NT networking after Windows
Important
NT is fully installed. Follow the instructions in the application note for the
network card you are using. The application notes are available from our
website. A few sample application notes are also included at the end of
this chapter.
26. Click Finish to finish setting up Windows NT.
27. Enter the correct Time Zone and Date and Time, then click Close.
28. Click OK twice to accept the VGA-Compatible Display Adapter (The
29. When prompted, click Restart Computer.
If you are going to format as FAT enter 2040 or less.
If you are going to format as NTFS enter 4090 or less.
Make sure C: New <Unfomatted> is selected.
another directory.
drive for corruption.
space is limited, choosing Portable will install only the necessary
components).
The CD-key is located on the back of the CD jacket.
computers on the network to access your computer.
password is used to administer User IDs and Windows NT security.
click Next.
video driver will be installed in the next section.)
Using Windows NT 4.0
Installing Retail Windows NT 4.0
6-5