Table of Contents
Advertisement
SURFACE COOKING
Panel Light
(select
models)
Sealed Burners
The panel light is turned on by pushing tile rocker
The sealed burners
of your range are secured to the
switch on the control panel and holding it in until the
cooktop and are not designed to be removed.
fluorescent
light comes on. It may be tnrned off by
Since the burners are sealed into the eooktop, boilovers
pushing the other side of the switeh,
or spills won't seep underneath the oooktop.
Your range
features
two special
Power
Burners
located
in the left rear and right front positions.
(NOTE:
Model CHG9800 features one Power Burner
located in the front posiCton.) These offbr higher speed
cooking that can be used to quickly bring water to a boil
and for large-quantity cooking.
The eooktop
on gas ranges
with sealed burners
is
POWERBURNER
designed with two contoured wells which contain spills.
Unlike a range with standard gas burners, this eooktop
does not lift-up
nor is it removable.
To prevent
damage to the range, do not attempt to lift the cooktop
for any reason.
L__]
Pilotless Ignition
i
Be snre all snrl;ace controls are set in the OFF position
prior to supplying gas to the range.
Your range is equipped with a pilotless ignition system
which eliminates the need for a constant standing pilot
light. The spark ignitor is located at the back-side of
each burner. When cleaning around the snrface burner,
use care. If a cleaning cloth should catch the ignitor, it
could damage it. This will prevent
the bunler
from
Burner Grates
lighting.
When reinstalling
the grates,
_
_lgnitor
place the indented sides together
so the straight
sides are at the
_"#'/_'_
REAR VIEW OF SEALED
BURNER
front
and rear. Although
the
burner grates are durable,
they
will gradually lose their shine due
to high temperatures.
<_
PAGE 6
Advertisement
Table of Contents
