Sunbeam Smartheat HE6150TF Instruction Booklet page 13

Using Your Heater (continued)
Setting Auto On
You can programme the heater to automati-
cally switch itself on after a preset number
of hours. For example, you could set the
heater in the morning to switch itself on an
hour before you expect to arrive home in the
evening.
1. Ensure the heater is in standby mode. To do
this, keep pressing the MODE button until
the display shows only the room temperature.
2. Press the TIMER button. The clock
hour H symbols will now appear.
3. Use the TIMER button to set the number of
hours before you want the heater to switch
itself on in exactly the same way as for the
Auto Off procedure.
After the preset number of hours, the heater
will automatically switch itself on to HI, with
the thermostat set to 23°C for maximum
comfort.
and
H
H
To cancel the Auto On function
Follow the directions as for Auto Off to set the
hour display to 0.0 hours.
This will cancel the Auto On function, and the
heater will revert to Standby mode.
Altering the heat setting and thermostat
Once the time has elapsed and the heater has
switched on, the heat setting and thermostat
can be changed as described earlier.
11