Removal and Replacement Procedures
✎
Steps 7 and 8 apply only to HP Compaq nx4800 and
Compaq Presario V2000 models.
7. Release the ZIF connector 1 to which the LED board cable is
connected and disconnect the cable 2 from the system board.
8. Remove the four PM2.0×4.0 screws 3 that secure the system
board to the top cover.
Disconnecting the LED Board Cable and Removing the System
Board Screws, HP Compaq nx4800 and Compaq Presario V2000
models Only
5–58
Maintenance and Service Guide