✎
Steps 8 and 9 apply only to HP Compaq nx4800 and Compaq
Presario V2000 models.
8. Remove the following:
1 Fifteen PM2.0×7.0 screws
2 Three PM2.0×4.0 screws
9. Lift the base enclosure 3 straight up and remove it.
Removing the Base Enclosure, HP Compaq nx4800 and
Compaq Presario V2000 models Only
Reverse the above procedure to install the base enclosure.
Maintenance and Service Guide
Removal and Replacement Procedures
5–39