Axis 5900 User Manual page 49

Note:
Note:
AXIS 5900 User's Manual
6. Write a text file containing the parameters you want to set:
BINARY_TYPE_1.
INT_ADDR.
ATYPE_1.
Parameters that you do not want to set should be excluded from the text file. Refer to the
Parameter list in this manual for information about which values that are valid for each
parameter.
7. Print the text file. The settings will be stored in the print server.
8. Open the Chooser and select the printer port you wish to use for printing
documents.
9. Close the Chooser.
The _CFG port disappears 60 minutes after the AXIS 5900 has been powered on. If you want it
to reappear, you must restart your print server.
Adding Printers in Macintosh
:BCP
:192.168.3.191
:EPSONLQ2
49