Print Server Mode (File Server Controlled) - Axis NPS 650 User Manual

Section 3: Setup for NetWare

Print Server Mode (File Server Controlled)

NetWare
Configuration
20
8. To specify more print queues, select LOGIN2 through LOGIN16 in
consecutive order. Repeat step 7 for each print queue.
9. Select Save, then select Cancel until AXCFG closes down.
This method uses a NetWare file server (the Configuration File Server) to
hold the print queue information. The NPS 650 will not automatically
log in to all file servers and scan for queues to service. Instead, the file
servers and print queues are specified on the configuration file server. This
is the recommended method for large networks, since it simplifies the
maintenance of a large number of print queues.
The NetWare configuration is different from the automatic and
parameter controlled modes. Instead of setting up queues on several file
servers, all queues are set up and maintained on the configuration file
server. The configuration procedure depends on which NetWare version
you are using.
Axis NPS 650 User's Manual