Snmp; Upnp - TP-Link TD-8816 User Manual

 Filter Type Selection: Select the URL Filter for the next configuration.
 Active: Select "Yes" to make the rule to take effect.
 URL Index: Select the index for the URL Filter entry.
 URL: Enter the URL for this URL Filter.
 URL Filter Listing: This displays the information about the URL Filter rules.
To add a URL filter entry:
For example: If you want to forbid the user to access the website: www.yahoo.com. Presume the
rule is aimed at the interface PVC0, and its index is "1".
Step 1: Select the "URL Filter" as the Filer Type Selection (show in Figure 4-33).
Step 2: Select the Index for the rule, and then enter the website in the URL field.
Step 3: Finally, Select Yes to active the rule, and then click the SAVE to save the entry.
Other configurations for the entries as shown in Figure 4-30:
Enter the URL Index to view or modify the entry.
Enter the URL Index to locate the specific rule, and then click the DELETE button to delete the
entry.

4.5.3 SNMP

Choose "Access Management→SNMP", you can see the SNMP screen. The Simple Network
Management Protocol (SNMP) is used for exchanging information between network devices.
 SNMP: Activate or deactivate the function.
 Get Community: Select to set the password for the incoming Get and Get next requests
from the management station.
 Set Community: Select to set the password for incoming Set requests from the
management station.

4.5.4 UPnP

Choose "Access Management→UPnP", you can configure the UPnP in the screen (shown in
Figure 4-35).
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
TD-8816 ADSL2+ Modem Router User Guide
Figure 4-34
40