Variable Sight-In - Bushnell 202355 Instruction Manual

displayed and flashing, or no indicators lit and the message ( ) flashing.
The modes can be cycled through in a circular fashion by pressing and releasing the mode button. The order of modes is
a follows: BOW, RIFLE A, RIFLE B, RIFLE C, RIFLE D, RIFLE E, RIFLE F, RIFLE G, RIFLE H, RIFLE I, RIFLE
)
J, REG, etc. When the bow selection is displayed, ( ) will flash and when the rifle selection is displayed, (
and ballistic group will be flashing. When the ( ) is displayed, the message ( ) will flash within the display.
Once the desired distance compensation mode is displayed, select it by pressing and releasing the POWER
button. Following this selection, the current unit of measure, "Y" for yards or "M" for meters will flash
in the display and the SETUP icon is still lit. Pressing the MODE button will toggle the unit of measure.
When the desired unit of measure is displayed, press the POWER button to accept the unit of measure.
If the user chooses RIFLE mode, and after having determined unit of measure, the user has the following options:
1. Variable Sight-In (VSI™) - Allows the rifle hunter to choose from four sight-in distances (100, 150, 200, or 300 yards
or meters) and provides holdover / bullet-drop data in inches, centimeters, MOA, or MIL. The "Sight Dist" (Sight-
In Distance) indicator will turn on and the current Sight-In Distance number will blink within the display (I.e. 100, 150,
200, or 300). The Sight-In Distance options can be cycled through in a circular fashion by pressing and releasing the
mode button. Once the desired Sight-In Distance is displayed, select it by pressing and releasing the power button.
2. And finally, if RIFLE mode was chosen, and as long as unit of measure and a sight-in distance was selected, you have the
option of determining how you would like hold-over / bullet-drop displayed. If measurement units are in yards, you will be able
to choose between inches, MOA, or MIL. If measurement units are in meters, you will be able to choose between centimeters,
MOA, or MIL. For example, the "CM" for centimeters or "IN" for inches will flash in the display and the SETUP icon is still
lit. Once the desired ballistic measure is displayed, select it by pressing and releasing the power button.
Upon returning to the normal operating menu, the current compensation mode and unit of measure will be identified
in the display as indicated below.
12