Installation Instructions - EverFocus EQ250 User's Manual And Operation Instructions

1/3” color digital camera

Hide thumbs Also See for EQ250:

Video Drive

Direct Drive

6. IRIS Level Control

Brightness Level can be adjusted from the IRIS level VR while using the

direct drive lens.

Turn counterclockwise to L to get darker picture.

Turn clockwise to H to get brighter picture.

7. V-Phase Adjustment

The vertical phase may require adjustment to synchronize the vertical phase

of the camera with other camera in the system when it is to be used in the

line-lock sync mode. Make the adjustment when the vertical phase of the

camera does not match with other cameras.

8. Mounting Base and Fixing Screws

To use when the mounting bracket is required while mounting the camera.

The mounting base can be attached to either the top or the bottom of the

camera, fix the mounting base onto the camera by using the 4 supplied fixing

screws.

9. Video Output Connector

BNC VBS 1.0 Vp-p, 75ohm

10. Audio Out Connector

11. Power Cable (EQ250)

12. DC12V/AC24V Screw Terminals (EQ250A)

1. Remove the cover cap from the top of the lens mount.

2. To attach a C-mount/CS-mount lens, turn the focal length adjustment

Pin1 Pin2

+12V GND VD-IRIS GND

Cnt- Cnt+

Installation Instructions

Pin3

Pin4

Drv+

Drv-

Lens Connector

Table of Contents