Installation And Adjustment - EverFocus EM900F EZ.HD SERIES User Manual

3. Installation and Adjustment

1. Connect the camera to a 12 VDC power source by using the supplied Power / Video Cable,
you can optionally use the supplied Power Pigtail Cable or a power adapter. (Refer to the
connection diagram as below )
2. Take the camera and turn it around, then configure the OSD menu by using the Joystick.
OSD indication as shown in the figure:
EM900F eZ.HD Micro Mini Metal Camera
• Push the Joystick up / down to select
among menu items.
• Push the Joystick left / right to adjust the
level of the selected item.
• Press the Joystick to enter the submenu or
exit the OSD Setup Menu.
８