Table of Contents
Advertisement
Refer to the audio configuration table below for the function of the audio ports in 2.1, 4.1,
5.1, or 7.1-channel configuration.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Light Blue (Rear
panel)
Lime (Rear panel)
Pink (Rear panel)
Pink (Front panel)
To configure an 7.1-channel audio output:
7.
USB 2.0 ports 7 and 8. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.
8.
USB 3.0 ports 3, 4, 5 and 6. These 9-pin Universal Serial Bus (USB) ports connect to
USB 3.0/2.0 devices.
•
•
•
•
9.
HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
10.
DVI-D port. This port is for any DVI-D compatible device. DVI-D can't be converted to
output RGB Signal to CRT and isn't compatible with DVI-I.
11.
PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.
1-12
Headset
4.1-channel
2.1-channel
Rear Speaker
Line In
Front Speaker
Line Out
Mic In
–
Use a chassis with HD audio module in the front panel to support an 7.1-channel
audio output.
DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows
operating system.
Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under
Windows
OS environment and after the USB 3.0 driver installation.
®
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
5.1-channel
Rear Speaker Out
Out
Front Speaker
Out
Out
Mic In
Bass/Center
–
Chapter 1: Product introduction
7.1-channel
Rear Speaker
Out
Front Speaker
Out
Bass/Center
Side Speaker
–
Out
®
Hide quick links:
Advertisement
Table of Contents
