Lan Port Led Indications - Asus Z97-C User Manual

Hide thumbs Also See for Z97-C:
Table of Contents

Advertisement

* LAN port LED indications

Activity Link LED
Status
Off
Orange
Orange (Blinking) Data activity
Orange (Blinking
then steady)
** Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Headset
2.1-channel
Line In
Light Blue
Line Out
Lime
Mic In
Pink
Orange
Black
Gray
2-12
The plugged USB 3.0 device may run on xHCI mode or EHCI mode, depending on the
operating system's setting.
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
Due to the design of the Intel
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB
devices must update their firmware for better compatibility.
Multi-VGA output supports up to three displays under Windows
displays under BIOS, and one display under DOS.
Intel display architecture design supports the following maximum supported pixel
clocks (Pixel Clock = H total x V Total x Frame Rate (Fresh screen rate)):
-
DVI port supports: 165 MHz
-
VGA port supports: 180 MHz
-
HDMI port: 300 MHz
Description
No link
Off
Linked
Orange 100 Mbps connection
Green
Ready to wake up
from S5 mode
4.1-channel
Line In
Front Speaker Out
Mic In
Rear Speaker Out
9 series chipset, all USB devices connected to the
®
Speed LED
Status Description
10 Mbps connection
1 Gbps connection
5.1-channel
Line In
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
-
OS environment, two
®
ACT/LINK
SPEED
LED
LED
LAN port
7.1-channel
Line In
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
Side Speaker Out
Chapter 2: Basic installation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents