Cycle Modifi Er Buttons - Kenmore 796.7162# Use & Care Manual

HOW TO USE
CYCLE MODIFIER BUTTONS
Each cycle has default settings that are selected
automatically. You may also customize these settings
using the cycle modifi er buttons.
AUTO DRY cycles are designed to properly care for
specifi c fabrics and loads. As a result, not all settings are
available for each cycle selection.
TIMED DRY cycles have default settings, but you may
also customize the temperature setting and add options.
Settings are not limited in most timed dry cycles. Use
care when setting options and modifi ers for these cycles
to prevent damage to your clothing.
A TEMP
Adjusts the temperature setting from AIR ONLY
to EXTRA HIGH. This allows precise care of your
fabrics and garments. Press the TEMP button
repeatedly to scroll through available settings.
Temperature settings are not adjustable in AUTO
DRY cycles.
DRY LEVEL
B
Sets the level of dryness for the selected AUTO DRY
cycle. Press the DRY LEVEL button repeatedly to
scroll through available settings. Use this button to
adjust the dryness of the articles in the load to your
preference.
• This option is not available with TIMED DRY cycles.
• The dryer will automatically adjust the cycle time.
• Selecting EXTRA DRY will increase the cycle time
and dry level, while DAMP DRY will decrease the
cycle time and dry level.
• Use the DAMP DRY setting for items that you wish
to iron or hang for fi nal drying.
NOTE: To protect your garments, not every dry level,
temperature, or option is available with every cycle.
A B
C TIMED DRY
Allows you to manually select 20, 30 or 40 minutes
of dry time. Use the MORE TIME/LESS TIME buttons
to increase or decrease the selected drying time in
1-minute increments. Press and hold the MORE TIME
or LESS TIME buttons to rapidly change the time.
D
CHECK VENT
(Duct Blockage Sensing System)
The CHECK VENT (Duct blockage sensing system)
detects and alerts you to blockages in the exhaust
system that reduce airfl ow from the dryer.
Maintaining clean exhaust system ducts improves
operating effi ciency and helps minimize service
calls, saving you money.
E
ADD WATER
If the steam feeder runs low on water, the ADD
WATER light will blink and the cycle will cancel.
Refi ll the steam feeder and then restart the cycle.
24
C
D
E