Cycle Modifier Buttons - Kenmore 796.8077 series Use & Care Manual And Installation Instructions

CYCLE MODIFIER BUTTONS

1
TIME DRY
Use Time Dry Option to change Drying Time on your
own. You can select the desired operation time
manually by pressing Time Dry button between 20 to
60 minutes.
2
TEMP. CONTROL
Use Temp. Control Option to select temperatures for
the Manual Cycles. Press TEMP. CONTROL until the
desired temperature setting glows. Temperature
modifiers cannot be used with the Sensor Dry Cycles.
When Using Air Dry
This chart shows examples of items that can be dried
using AIR DRY.
Type of Load
Foam rubber-pillows,
padded bras, stuffed toys
Plastic shower curtains,
tablecloths
Rubber-backed rugs
Olefin, polypropylene,
shear nylon
Reset cycle to complete drying, if needed.
HOW TO USE
4 3
Default Time*
(Minutes)
20 - 30
20 - 30
40 - 50
10 - 20
26 26
2 1
• Check to see that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during
the cycle.
• Dry item completely. Foam rubber pillows are slow to
dry.
NOTE: Air Dry is not available with Sensor Dry Cycles.
3
DRY LEVEL
• Use these buttons to set dry level
• First, select sensor dry cycle.
• Select dry level to adjust how much you want to dry
the load. As the cycle runs, the control senses the
dryness of the load and adjusts the time
automatically based on the selected dryness level.
NOTE : DRY LEVEL selections can only be made
while using Sensor Dry Cycles. Selecting MORE Dry
or LESS Dry automatically adjusts the needed time
which is already sensed.
4
BEEPER
The BEEPER controls the volume of the beep that is
made when you press any of the buttons on the
control panel.
Press BEEPER to adjust the sound level or turn off
the signal.