IBM Infoprint 1422 User Manual page 156

Problem
Vertical or horizontal streaks
appear on the page.
The print is light but the Toner
Low message is not displayed.
The Toner Low message is
displayed.
Solid black areas or white streaks
appear on transparencies or
paper.
Troubleshooting
Solution
• The toner may be low. Remove the print cartridge. To utilize the
remaining toner, shake the cartridge gently, and then reinstall it. See
Changing the print cartridge
cartridge.
• If you are using preprinted forms, make sure the ink can withstand
temperatures of 200°C (392°F).
• Remove the print cartridge and shake it from side to side to
redistribute the toner to extend the life of the cartridge, and then
reinstall it. See Changing the print cartridge
how to shake the cartridge.
• Replace the used cartridge with a new one. See
cartridge for instructions.
• Remove the print cartridge and shake it from side to side to
redistribute the toner to extend the life of the cartridge, and then
reinstall it. See Changing the print cartridge
how to shake the cartridge.
• Replace the used cartridge with a new one. See
cartridge for instructions.
• Choose a different fill pattern in your software application.
• Try a different type of print media. Print media designed for copiers
provides the best quality.
• Remove the print cartridge and shake it from side to side to
redistribute the toner to extend the life of the cartridge, and then
reinstall it. See Changing the print cartridge
how to shake the cartridge.
• Replace the used cartridge with a new one. See
cartridge for instructions.
Solving print quality problems
154
for an illustration of how to shake the
for an illustration of
Changing the print
for an illustration of
Changing the print
for an illustration of
Changing the print