IBM Infoprint 1422 User Manual page 109

Message
Resetting the Printer
Restoring Factory
Defaults
Std Bin Full
Toner Low
Tray <x> Missing
Waiting
1565 Emul Error Load
Emul Option
2<xx> Paper Jam
31 Missing or Defective
Cart.
Understanding the printer messages
What this message means
The printer is resetting to the current
default settings. Any active print jobs
are canceled.
The printer is restoring the factory
default printer settings. When factory
default settings are restored:
• All downloaded resources (fonts,
macros, symbol sets) in the printer
memory are deleted.
• All menu settings return to the
factory default setting except:
– The Display Language setting in
the Setup Menu.
– All settings in the Parallel Menu,
Serial Menu, Network Menu, USB
Menu, and Fax Menu.
The standard bin is full.
The print cartridge is low on toner.
The specified tray is either missing or
not fully inserted into the printer.
The printer has received a page of
data to print but is waiting for an End of
Job command, a Form Feed
command, or additional data.
The download emulator version on the
firmware card does not match the
printer code version.
This error can occur if you update
printer firmware or move a firmware
card from one printer to another.
The printer detects a jam.
The print cartridge is missing or is
defective.
Understanding the printer messages
What you can do
Wait for the message to clear.
See also:
to change printer settings
Wait for the message to clear.
See also:
settings
Remove the stack of paper in the bin to
clear the message.
• Shake the print cartridge to utilize
the remaining toner.
• Replace the cartridge.
• Press Go to clear the message and
continue printing.
Note: If you do not replace the
cartridge, you may experience print
quality problems.
Insert the tray completely into the
printer.
See also:
• Press Go to print the contents of the
buffer.
• Press Menu to open the Job Menu
and cancel the current job.
See also:
The printer automatically clears the
message in 30 seconds, and then
disables the download emulator on the
firmware card.
Contact the place you bought your
printer.
Clear the paper path.
See also:
Install a print cartridge or replace the
defective cartridge.
107
Using the operator panel
Restoring factory default
Loading trays
Canceling a print job
Clearing jams