Bottom Components - HP 397381-001 User Manual

Bottom components

Component
(1)
Battery bay
(2)
Battery pack release latch
(3) Memory module compartment
(4) Hard drive bay
(5) Vents (2)†
*Battery packs vary by model.
†The computer has 3 vents. One other vent is located on the rear of the computer.
10 Chapter 1 Notebook Tour
Description
Holds the primary battery pack.*
Releases the battery pack from the battery bay.
Contains the memory module slots.
Holds the hard drive.
Enable airflow to cool internal components.
CAUTION To prevent overheating, do not obstruct vents. Use the
computer only on a hard, flat surface. Do not allow another hard
surface, such as an adjoining optional printer, or a soft surface,
such as pillows or thick rugs or clothing, to block airflow.
NOTE The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the internal
fan to cycle on and off during routine operation.
ENWW