Replacing The Diskette Drive - Lenovo 3000 Hardware Maintenance Manual

Replacing the diskette drive

This procedure describes how to remove and replace the diskette drive.
1. Remove the computer cover. See "Removing the cover" on page 123.
2. Remove the front bezel. See "Removing and replacing the front bezel" on page
3. Disconnect the signal and power cables from the rear of the diskette drive.
4. Press the release button and slide the diskette drive out the front of the
5. Remove the retainer bracket from the failing diskette drive and install it on the
6. Slide the new diskette drive into the drive bay until it snaps into position.
7. Connect the signal and power cables to the drive.
8. Go to "Completing the FRU replacement" on page 161.
154
Hardware Maintenance Manual
128.
computer.
new diskette drive.