Filling The Detergent And Additives - AEG L 61271 BI User Manual

14 www.aeg.com

9.2 Filling the detergent and additives

Always obey the instructions that you find on the packaging of the de-
tergent products.
9.3 Setting the programme
(knob 1 )
Turn the programme selector dial to the
required programme.
The programme dial determines the
type of washing cycle (e.g. water level,
drum movement, number of rinses) and
the washing temperature according to
the type of laundry.
The pilot light of button 8 starts blinking.
The detergent compartment for the prewash phase, the soak
programme and for the stain function.
Add the detergent for prewash, soak and stain remover before
the start of the programme.
The detergent compartment for the washing phase.
If you use a liquid detergent, put it immediately before you start
the programme.
Liquid additives compartment (fabric conditioner, starch).
Put the product in the compartment before you start the pro-
gramme.
This is the maximum level for the quantity of liquid additives.
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
The programme dial can be turned ei-
ther clockwise or anticlockwise.
= Reset programme / switching OFF
of the machine