Setting The Spin Speed - AEG L 61271 BI User Manual

If you turn the programme dial to
another programme when the
appliance is working, the yellow
pilot light of button 8 blinks 3
times. The display shows the
message Err to indicate a wrong
selection. The machine will not
perform the new set programme.
9.4 Setting the
TEMPERATURE (button 2)
When setting a programme, the
appliance automatically propo-
ses the default temperature pro-
vided for that programme.
Press the button 2 repeatedly to in-
crease or decrease the temperature, if
you want your laundry to be washed at a
different temperature.
The wash with cold water is indicated
with .
For the maximum and the mini-
mum available wash water tem-
perature, see «Washing pro-
grammes».

9.5 Setting the SPIN speed

(button 3)
When you set the programme, the appli-
ance automatically proposes the maxi-
mum spin speed allowed by that pro-
gramme.
Press this button repeatedly to change
the spin speed. The relevant light will
light up.
RINSE HOLD : the water of the last rinse
is not emptied out to prevent the fabrics
from creasing. When the programme
has finished the display shows a blinking
.
The DOOR pilot light goes on.
The pilot light of button 8 is off. The
door is blocked to indicate that the wa-
ter must be emptied out.
To empty the water out please read
chapter «At the end of the pro-
gramme».
9.6 Setting the STAIN option
(button 4)
Set this option to treat heavily soiled or
stained laundry with stain remover
The appliance extends the main wash
phase and intensifies the stain action
phase. The relevant light illuminates.
This option is not available with
a temperature lower than 40°C.
If you wish to perform a programme with
the stain option, pour stain remover into
compartment .
9.7 Setting the EXTRA RINSE
option (button 5)
This appliance is designed for saving wa-
ter.
However, for people with a very delicate
skin (allergic to detergents) it may be
necessary to rinse the laundry using an
extra quantity of water (extra rinse).
The appliance will perform some addi-
tional rinses.
9.8 SETTING PERMANENTLY
THE EXTRA RINSE OPTION
If you wish to activate this option perma-
nently press simultaneously buttons 2
and 3 for some seconds: the light C is
on. If you wish to cancel it press the
same buttons until the symbol disap-
pears.
9.9 Setting the TIME SAVING
option (button 6)
This option allows you to modify the
washing time, automatically proposed
by the appliance.
Press button 6
once
DAILY The relative pilot light
comes on.
The washing duration will
be reduced to wash daily
soiled laundry.
Press button 6 twice
ENGLISH
15