Filling The Detergent And Additives - AEG L 82470 BI User Instructions

14 www.aeg.com

9.2 Filling the detergent and additives

Always obey the instructions that you find on the packaging of the de-
tergent products.
9.3 Setting the programme
(knob 1 )
Turn the programme selector dial to the
required programme.
The programme dial determines the
type of washing cycle (e.g. water level,
drum movement, number of rinses) and
the washing temperature according to
the type of laundry.
The pilot light of button 8 starts blinking.
The programme dial can be turned ei-
ther clockwise or anticlockwise.
= Reset programme / switching OFF
of the machine
If you turn the programme dial to
another programme when the
appliance is working, the yellow
pilot light of button 8 blinks 3
times. The display shows the
message Err to indicate a wrong
selection. The machine will not
perform the new set programme.
The detergent compartment for the prewash phase, the soak
programme and for the stain function.
Add the detergent for prewash, soak and stain remover before
the start of the programme.
The detergent compartment for the washing phase.
If you use a liquid detergent, put it immediately before you start
the programme.
Liquid additives compartment (fabric conditioner, starch).
Put the product in the compartment before you start the pro-
gramme.
This is the maximum level for the quantity of liquid additives.
9.4 SETTING THE
TEMPERATURE (Button 2)
When setting a programme, the
appliance automatically propo-
ses the default temperature pro-
vided for that programme.
Press the button 2 repeatedly to in-
crease or decrease the temperature, if
you want your laundry to be washed at a
different temperature.
The cold wash is indicated with - - and
the symbol .
For the maximum and the mini-
mum available wash water tem-
perature, see «Washing pro-
grammes».