Table of Contents
Advertisement
Solving Common Problems
The following table lists possible problems, the possible
cause of each problem, and the recommended solutions.
Problem
Screen is blank or
the No Input Signal
message is
displayed.
User's Guide
Troubleshooting
Possible Cause
Power cord is
disconnected.
Monitor power switch is
turned off.
Video cable is
improperly connected.
Screen blanking utility is
active or PC is in the
power saving mode.
Solution
Connect the power cord.
Press the power button.
Connect the video
cable properly. Refer to
Chapter 3 "Setting Up
the Monitor" for more
information.
Depress any key on the
keyboard or move the
mouse to deactivate the
screen blanking utility or exit
the power saving mode.
5
5–1
Advertisement
Table of Contents
