Maintenance And Cleaning; Cover Filter; For The Condenser (Products Equipped With A Condenser); Filter Drawer (For Products Equipped With A Heat Pump) - Blomberg TROCKNER TKF 7330 A User Manual

6

Maintenance and cleaning

Cover filter

Lint and fibres released from the laundry
to the air during the drying cycle are
collected in the "Cover Filter". Such
fibre and lint are generally formed during
wearing and washing.
C
Always clean the filter after each
Drying process.
For Filter cleaning;
1 Take out the cover
2 Lift the Cover filter up to pull out.
3 Clean lint, fibre, and cotton raveling
by hand or with a soft piece of cloth.
4 Place the filter back into its place.
For the condenser (products
equipped with a condenser);
Hot and humid air in the condenser is
cooled with the cold air from the room.
Thus, the humid air circulating in your
machine is condensed and then pumped
into the tank.
C
Clean the condenser after every 20
drying cycles or once a month.
To clean the condenser;
1 If a drying process has been carried
out, open the door of the machine
and wait until it cools down.
2 Unlock the 3 condenser locks after
opening the kick plate.
3 Pull out the condenser.
4 Clean the condenser with pressurized
water and wait until the water drains.
5 Replace the condenser with the side
labeled "Top" facing upwards. Lock
the 3 condenser locks.
6 Close the kick plate cover.
Filter drawer (for products
equipped with a heat pump)
Lint and fibre that could not be caught
by the cover filter are blocked in the
filter drawer behind the kick plate.
"Condenser cleaning" warning light will
light up periodically after a maximum 5
drying cycles as a reminder.
In order to get the best performance from
your machine, clean the cover filter and the
filter drawer after each drying cycle. There
is a two-phase filter in the drawer. The first
phase is the cover filter and the second
17 - EN