Bradford White IGI-180R-10 Service Manual page 9

II - SPECIFICATIONS
Model type
Type of appliance
Operation
Exhaust system
Maximum/Minimum gas rate
(Input BTU's)
Hot water capacity,
(50°F rise)
Setpoint Temperature
(without remote)
Temperature range
(with remote)
Approved gas type
Installation
Dimensions
Weight
Thermal Efficiency rating
Noise level
Connections
Ignition system
Electrical consumption
Water temperature control
Water flow control
Recommended Minimum water
supply pressure
Maximum water supply pressure
- GENERAL
RESIDENTIAL
Temperature controlled continuous
flow gas hot water system
With / without remote controls, mounted
in kitchen, bathroom, etc.
Direct Vent - Forced combustion
180,000 BTU's - 15,000 BTU's Natural Gas
180,000 BTU's - 15,000 BTU's Propane Gas
0.5 to 6.5 GPM
Factory setting - 120°F
MC controller : 96 - 160°F
BC controller : 96 - 120°F
BSC controller : 96 - 120°F
Natural or Propane - Ensure unit matches
gas supply type.
Indoor Only
Height 23 5/8"
Width 13 25/32"
Depth 8 13/16"
49 Lbs.
0.87 (Propane) 0.82 (Natural)
49 dB (A)
Gas supply 3/4" NPT (Male)
Cold water inlet 3/4" NPT (Male)
Hot water outlet 3/4" NPT (Male)
Direct electronic ignition
Operating - 75 watts
Standby - 5.5 watts
Anti-frost protection 100 watts
Simulation feedforward and feedback.
Water flow sensor, electronic water control
device, and electronic by-pass control device
20 PSI (recommend 50-80 PSI for maximum performance)
150 PSI
9
COMMERCIAL
Factory setting - 140°F
MCC controller : 96-180°F