Advertisement
iSCSI device support
Built-in iSCSI support allows the AutoDome 800 Series to
stream video directly to an iSCSI RAID array. This enables
efficient video storage just like a conventional DVR
without streaming high bandwidth video across the
network, making system recording performance totally
independent from network performance.
Network-based control and configuration
The AutoDome 800 Series enables full camera control and
configuration capabilities over the network. Operators or
technicians can control camera pan/tilt/zoom operation,
presets, tours, and alarm management functions virtually
anywhere without need for additional wiring.
The embedded web server lets the installer access all the
user settings, make camera adjustments, and update
firmware via a standard web browser.
Device management
Simple Network Management Protocol (SNMP) support
facilitates the remote monitoring and management. The
AutoDome 800 Series provides full support for SNMP v3.
Superior privacy masking
The AutoDome 800 Series provides 24 individual, easy to
configure privacy masks, with up to 24 displayed in the
same scene. As the camera is zoomed each mask changes
size smoothly and quickly ensuring that the covered
object cannot be seen. You also have a choice of black or
gray masking characteristics.
Ease of installation and servicing
The AutoDome 800 Series has been designed for quick
and easy installation; a key feature from Bosch CCTV
products. The dome comes fully assembled and ready for
wall or pipe mount applications. Also available are corner,
mast, and roof mounting kits which allow the AutoDome
800 Series to be easily adapted for the individual site
requirements.
Viewing
View the video on a PC using a Web browser or via the
Bosch Video Client, the Bosch Recording Station, the
Bosch Video Management System, or integrate it into
another video management system.
Certifications and Approvals
HD standards
Complies with the SMPTE 274M-2008 Standard in:
-
Resolution: 1920x1080
-
Scan: Progressive
-
Color representation: complies with ITU-R BT.709
-
Aspect ratio: 16:9
-
Frame rate: 25 and 30 frames/s
Complies with the 296M-2001 Standard in:
-
Resolution: 1280x720
AutoDome 800 Series HD PTZ Camera System | 3
-
Scan: Progressive
-
Color representation: complies with ITU-R BT.709
-
Aspect ratio: 16:9
-
Frame rate: 25, 30, 50 and 60 frames/s
Electromagnetic Com-
Complies with FCC Part 15, ICES-003, and CE
patibility (EMC)
regulations
Product Safety
Complies with CE regulations, UL, CSA, EN, and
IEC Standards
Environmental
IP66
Technical Specifications
20x HD Day/Night Camera
Imager
1/3-in.-type CMOS
Number of Pixels
Approximately 2 megapixels
Aspect Ratio
HD: 16:9
Lens
20x optical zoom,(4.7 to 94 mm)
Focus
Automatic (normal, low), One-push, Man-
ual
Iris
Automatic with manual override (F1.6 to
F3.5)
Field of View
3° (tele) to 55° (wide)
Minimum Working Distance
10 mm (wide) to 150 mm (tele)
Automatic Gain Control
Automatic/Manual (–3 to 28 dB, 21
steps)
Synchronization
Internal
Aperture Correction
Adjustable sharpness
Digital Zoom
10x
1
Sensitivity (typical)
Day Mode
SensUP Off
(1/30 [1/25] shutter);
High Sensitivity Off
SensUP On, max.
(0.25 sec. shutter);
3
High Sensitivity On
Night Mode
SensUP Off
(1/30 [1/25] shutter);
High Sensitivity Off
SensUP On, max.
(0.25 sec. shutter);
3
High Sensitivity On
Electronic Shutter Speed
1/1 to 1/10000 s, 21 steps
(AES)
Signal to Noise Ratio
> 50 dB (AGC off)
Backlight Compensation
On/Off
White Balance
ATW, Indoor, Outdoor, AWB Hold, Extend-
ed ATW, Manual
2
2
30 IRE
50 IRE
0.8 lux
1.7 lux
(0.074 fc)
(0.158 fc)
0.04 lux
0.08 lux
(0.004 fc)
(0.007 fc)
0.12 lux
0.3 lux
(0.011)
(0.028 fc)
0.005 lux
0.011 lux
(.0005 fc)
(.001 fc)
www.boschsecurity.com
Advertisement
