Source Autoswitch Settings; Primary Source Recovery; Secondary Source - Samsung DM32D User Manual

Source AutoSwitch Settings

MENU m → System → Source AutoSwitch Settings
Source AutoSwitch Settings
Source AutoSwitch Settings

Primary Source Recovery

Primary Source

Secondary Source

- The displayed image may differ depending on the model.
Turning on the display with
will automatically search the different video input sources for active video.
Source AutoSwitch Settings
→ ENTER E
When the
The
Secondary Source
Off
If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source,
Off
each search checking the primary and then secondary source. If both searches fail, the display will return to the first video
끄기
source and display a message indicating that there is no signal.
All
When the
for an active video source, returning back to the first video source in the sequence if no video is found.
HDMI
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is connected.
― The
Primary Source
Specify
Secondary Source
Specify
Source AutoSwitch Settings
Source AutoSwitch Settings is On, the display video source will automatically be searched for active video.
Primary Source
selection will be activated, if the current video source is not recognized.
selection will become active, if no primary video source is available.
Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking
Primary Source Recovery
function is disabled if
Primary Source for the automatic input source.
Secondary Source for the automatic input source.
On, and the previous video source selection is not active, the display
Primary Source is set to All.