Electrolux ESE6107 User Manual page 18

18
fooD ComPaRTmENT fEaTuRES
open the bin to access the finger tabs at the ends of
the telescopic slides, on each side of the bin. using your
thumb and forefinger, lift the bin over the end of the slide
and clip in place. If the drawer is not fully engaged on the
slide, it's possible the drawer won't stay on the slide if fully
extended.
3. fully close the bin.
When replacing the drawers after cleaning, we
recommend fitting the lower drawer first.
Freezer baskets
Wire baskets are used in the compact side by side model.
all the baskets pull out for easy access and have a stop to
prevent the basket being pulled out too far.
To remove the basket, pull it out until it hits the stop
then lift the front to unhook the stop while continuing to
pull forward, until the basket is free of the runners under
the shelf.
Deodoriser
Your appliance is fitted with a deodoriser to assist with the
removal of food odours inside your appliance.
(Refer item 14).
odours are removed by absorption through the filter by
the normal operation of the appliance. Keeping food
covered and wrapping food with plastic wrap will also help
to reduce the odours inside your appliance.
deodoriser
the end of the slide must
be clipped into place
Bottle caddy
The bottle caddy is made of stainless steel. It is used to
store various types of bottles like wine or beer. Bottles
should be stored with the bottom end towards the back of
the refrigerator.
Slide away glass shelf
This shelf can be used either as a full depth shelf or when
tall items need to be stored at the front of the appliance it
can be collapsed to half its original depth.
• To collapse the shelf:
1. To release the front half of the shelf, pull the front
section of the shelf forward whilst pushing the rear
edge of the front section up.
hook detail
2. Pull the shelf forward and allow the rear to drop into
the side channels.
3. Push the front shelf backwards until it reaches the
rear stops.
4. Repositioning:
To reposition shelf, pull forward until shelf reach stops.
Lift shelf clear of stops and continue to pull forwards.
once the shelf is clear of the cabinet it can be
repositioned onto any of the other runners.