Electrolux ESE6107 User Manual page 13

ICE & WaTER INSTaLLaTIoN
Step 8.
Push shorter tube into tap fitting past insertion mark.
Step 9.
Push other end into filter INLET.
Step 10.
Connect remaining tube length into filter ouTLET.
Step 11.
Connect other end of remaining tube length to inlet on
bottom right hand side of refrigerator back.
Ensure black circlip is fitted to the valve on the rear of the
fridge when making this connection.
water
flow
direction
inlet location
Step 12.
Turn on water and check all joints and tubes for leaks.
Step 13.
Reconnect the power.
Step 14.
move the refrigerator back into place being careful not to
kink or split the tubing.
13