Table of Contents
Advertisement
How to empty the dust container and maintain the HEPA filters
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked
Filter
EF91B
Screen
Exhaust filter
EF6
Brush Roll
Proprietary Carpet Conditioning and Air Freshening Materials
After using proprietary carpet conditioning powders, it is recommended that the filters be changed. Some of these
preparations contain substances which if left in the vacuum for extended periods could damage the plastic mouldings
which form the structure of the vacuum.
Many air fresheners, household deodorants, sprays and polishes contain a highly flammable gas propellant. Because
of this, it is particularly important that these products are used strictly in accordance with the relevant manufacturer's
instructions.
It is essential that none of the above products are sprayed directly into the vacuum or any of its filters, hose assembly,
dustbag chamber or dustbin.
Press lever to release bottom lid.
Debris will empty.
FILTER EF91B – Replace or clean regularly with filter brush to maintain suction
Empty dustbin. Pull
back latch to lift off lid.
Remove screen. Rinse
screen, filter and
dustbin. Dry thoroughly.
EXHAUST FILTER EF6 – Replace every 6 months
Remove dustbin.
BELT ZE090 – Replace worn, cut or out of shape belt
Belt ZE090
DUSTBIN – Empty after each use
Close bottom lid
until it clicks.
For quick clean: tap filter. To clean thoroughly: grasp
filter and twist to remove from lid. Shake dust from filter.
Align tab with slot to
Reinstall filter. Align lid
reinstall screen.
at front; press down until
lid snaps into place.
Press down tab and
Lift out filter and replace. Reinstall
remove filter cover.
cover and snap into place.
BRUSH ROLL – Clean monthly
7
I
for ON-OFF.
Advertisement
Table of Contents
