Quick Bios Setup - SOYO SY-5SSM Quick Start Manual

Hide thumbs Also See for SY-5SSM:

Table of Contents

SY-5SSM Quick Start Guide

Quick BIOS Setup

After the hardware installation is complete, turn the power switch on, then press the

<DEL> key during the system diagnostic checks to enter the Award BIOS Setup program.

The CMOS SETUP UTILITY will display on screen. Then, follow these steps to complete

the quick BIOS setup.

Step 1. Select [LOAD SETUP DEFAULT]

Select the " LOAD SETUP DEFAULT" menu and type " Y" at the prompt to load the BIOS

optimal setup.

Step 2. Select [STANDARD CMOS SETUP]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to " Auto" .

Select [SAVE & EXIT SETUP]

Step 3.

Press <Enter> to save the new configuration to the CMOS memory, and continue the

boot sequence.

Table of Contents