Table of Contents
Advertisement
Blocked Sensors
cannot be detected and the collision warning system does not function.
The following table lists possible causes and actions for this message
being displayed.
Cause
The surface of the radar in the
grille is dirty or obstructed in
some way
The surface of the radar in the
grille is clean but the message
remains in the display
Heavy rain, spray, snow, or fog is
interfering with the radar signals
Swirling water, or snow or ice on
the surface of the road may
interfere with the radar signals
2014 MKT (mkt)
Owners Guide gf, 2nd Printing, December 2013
USA (fus)
Driving Aids
If a message regarding a blocked
sensor appears in the information
display, the radar signals from
the sensor have been obstructed.
The sensors are located behind a
fascia cover near the driver side of
the lower grille. When the sensors
are obstructed, a vehicle ahead
Action
Clean the grille surface in front of
the radar or remove the object
causing the obstruction
Wait a short time. It may take
several minutes for the radar
to detect that it is no longer
obstructed
The collision warning system is
temporarily disabled. Collision
warning should automatically
reactivate a short time after the
weather conditions improve.
The collision warning system is
temporarily disabled. Collision
warning should automatically
reactivate a short time after the
weather conditions improve.
241
Advertisement
Table of Contents
