Advertisement
Dust collector
Use the dust collector for safe, sanitary
overhead operations. Install the bit, then
attach the dust collector on the end by
turning and applying pressure. Then secure
it
by turning the metal retainer clockwise.
CAUTION :
Empty the dust collector of
i t s
contents
after drilling every 2 or 3 holes.
Metal retainer
Drilling in wood or metal
Set the change lever for "rotation only."
Use the optional drill chuck and chuck
adapter for drilling up to 13 mm (1/2") in
metal and up to 30 mm (1-3/16") in wood.
To install the drill chuck and chuck adapter,
refer to "installing or removing drill bit".
I
1
Drill holder
I
Drill chuck
CAUTION :
When the drill chuck
is
installed on this tool, do not use "rotation with hammering"
action. The drill chuck and chuck adapter may be damaged.
Core bit (optional accessory)
Screw the core bit on the adapter. Install
the core bit and adapter on the tool in the
same manner as a drill bit.
10
Advertisement
