European Touch FORTE’ Owner's Manual page 13

Your pedicure spa shipped w ith the seat bottom and seat back already attached to the base. Follow
these instructions to connect the seat back to the pedicure spa:
Forte'
Step 1: Remove the hitch and clevis pins located
on the seat back mounting bracket on the back of
the chair.
Step 2: Slide the seat bracket into the black end
on the linear actuator, and line up the holes.
Step 3: Slide the clevis pin through the holes and
secure by inserting the hitch pin through the
small hole on the clevis pin.
Document ID:06080001
Step 1: Remove the hitch and clevis pins
located on the seat back mounting bracket on
the back of the chair.
Step 2: Line up the hole on the seat bracket w ith
the hole on the cylinder end.
Step 3: Slide the clevis pin through the holes
and secure by inserting the hitch pin through the
end hole on the clevis pin.
Rev: E Technical Support: 800-626-6912
Attaching the Seat Back
Altera
Page 13 of 24