HP photosmart 620 series User Manual page 50

Problem Possible cause Solution
My image is My image is The flash
My image is My image is
too bright. too bright. too bright. too bright. provided too
much light.
A natural or
artificial
source other
than the flash
provided too
much light.
You were too
close to the
subject to use
the flash.
48
Change the flash setting to Flash Flash
Flash Flash
Off Off Off Off.
Try taking the picture from a
different angle. Avoid pointing
the camera directly toward a
bright light or reflective surface
on a sunny day.
Move back from the subject or
set the flash to Flash Off Flash Off Flash Off Flash Off and
take the picture again.
hp photosmart 620 user's manual