Specifications; Staple Selection; Accessories; Standard Accessories - Hitachi N 5010A Instruction And Safety Manual

English

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Staple capacity
Air consumption

STAPLE SELECTION

WARNING
Be sure to use only the genuine HITACHI staples
for the N5010A. The use of any other staples can
result in tool malfunction and/or staple
breakdown, leading to serious injuries.
Only staples shown in the Table below can be driven with
this Stapler.
Dimensions of staples
16 Gauge
1/2"Crown staple
.386"
(9.8 mm)

ACCESSORIES

WARNING
Accessories other than those shown below can
lead to malfunction and resulting injuries.

STANDARD ACCESSORIES

1
Min. Max.
.052"
(1.33 mm)
2
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
14-3/8" × 10-5/32" × 3"
(365 mm × 258 mm × 76 mm)
4.4 lbs. (2.0 kg)
150 Staples
.040 ft 3 /cycle at 100 psi
(1.1 ltr/cycle at 6.9 bar)
(1.1 ltr/cycle at 7kgf/cm
1 Eye protector
2 Allen wrench for M5 screw

OPTIONAL ACCESSORIES

Sequential Trip Mechanism Kit (Code No. 876762)
(Single Shot Parts)
Pneumatic Tool Lubricant
1 oz. (30 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any
obligation on the part of HITACHI.

APPLICATIONS

Construction work such as wall sheathing, roof
decking, subflooring.
Mobile and modular home construction.
Making wooden boxes, and expendable pallets.

BEFORE OPERATION

Read section titled "SAFETY" (pages 4 – 6).
Make sure of the following before operation.

WORKING ENVIRONMENT

No flammable gas, liquid or other flammable
objects at worksite.
Clear the area of children or unauthorized
personnel.

AIR SUPPLY

— 8 —
2 )
2 )
... sold separately
(Code No.877153)
(Code No.874042)
(Code No.876212)
WARNING
DANGER
NEVER use oxygen or
other bottled gases.
Explosion may occur.
1
1