Choosing The Language; Setting The Date And Time - HP 320 Series User Manual

Choosing the language

The first time you turn the camera on,
the following screen appears and
prompts you to choose a language.
1
Scroll to the language that you
want by using the
buttons.
2
Press to select the highlighted
language.

Setting the date and time

1
Press repeatedly until your
preferred date format appears
(M = month, D = day, Y = year).
Press the right
highlight the date.
2
Press to select the first value,
and then use the
change it. Press
the same way.
3
Press the
press
4
Press the
in the same way you set the date values in step 2.
5
When finished setting the date and time, press the
to highlight
If the batteries are removed from the camera for longer than
ten minutes, you might need to reset the date and time. For
more information about batteries, see
and accessories and accessories
and accessories and accessories
1-Getting started
Arrow Arrow
Arrow Arrow
Arrow Arrow Arrow Arrow
buttons to
to confirm. Set the remaining values in
button to highlight the time format, and then
if you want to change it.
button to highlight the time. Set the time values
Exit, and then press Exit
Exit Exit
on page 59.
button to
.
Appendix A: Batteries Appendix A: Batteries Appendix A: Batteries Appendix A: Batteries
button
13