Teletronics International WL-CPE-ROUTER User Manual page 8

Teletronics International Inc.
With the configuration utility, you will be able to setup the CPE as a CPE, setup the CPE
as an AP, and setup IPs, gateways, subnets, and routes.
Clicking on the side options will take you to a variety of menus which include,
Server Status Page
Assign W/LAN IP Addresses
Static and Default Routes
Configure Wireless Adapter
IP Masquerading
802.1d for AP and Ethernet
Change Admin Password
Upgrade Firmware
Restore Factory Defaults
• When adjusting IP addressing or gateway routes, clicking the line of the address you
wish to modify will automatically choose that address and put the values in the
appropriate fields.
CPE Complete User Manual
Provides wireless status
Allows you to assign IP addresses to
Ethernet and Wireless LAN cards
Allows the setup of gateways and routes
Allows the configuration of up to 4 wireless
Adapters
Allows NAT to be enabled or disabled
Enables or disables bridging only in AP
mode
Allows the admin password to be changed
Upgrades the current firmware
Restores the CPE to factory default settings
Page 7 of 27