Filling The Salt Container; Filling The Rinse Aid Dispenser - AEG FAVORIT 34030VI User Manual

6.2 Filling the salt container

6.3 Filling the rinse aid dispenser

A D B
C
A B
A
+ -
C
D
CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To pre-
vent it, after you fill the salt con-
tainer, start a programme.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt con-
tainer (only for the first time).
3. Fill the salt container with dishwash-
er salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Only use rinse aid for dishwash-
ers. Other products can cause
damage to the appliance.
The rinse aid, during the last rins-
ing phase, helps to dry the
dishes without streaks and stains.
1. Press the release button (D) to open
the lid (C).
2. Fill the rinse aid dispenser (A), no
more than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 or 6 (highest quantity).
ENGLISH
9