Manual Adjustment; Electronic Adjustment; Filling The Salt Container - AEG FAVORIT54030IM0 User Manual

Manual adjustment

Electronic adjustment

The appliance must be in setting
mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
1. Make sure that the programme mark-
er on the programme knob is aligned
with the off position.
2. Press and hold Multitab. At the same
time turn the programme knob coun-
terclockwise until the programme
marker is aligned with the first pro-
gramme on the control panel.

6.2 Filling the salt container

Turn the water hardness dial to the posi-
tion 1 or 2.
3. Release Multitab when the display
shows the setting of the water soften-
er.
• Example:
4. Press Multitab again and again to
change the setting.
5. To confirm the setting, turn the pro-
gramme knob until the programme
marker is aligned with the off posi-
tion.
1.
Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt con-
tainer (only for the first time).
3. Fill the salt container with dishwash-
er salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To pre-
vent it, after you fill the salt con-
tainer, start a programme.
ENGLISH
41
= level 5.