Setting Up The Monitor; Unpacking The Monitor; Installing The Monitor; Installing On A Desktop - HP w1707 User Manual

Unpacking the Monitor

1. Unpack the monitor. Make sure all contents are included. Store the packing box.
2. Turn off the computer and other attached devices.
3. Determine whether the monitor will be desktop mounted or wall-mounted. See "Installing the Monitor."
4. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor
screen-down while preparing it for installation.
5. You need a Phillips screwdriver for preparing the monitor for wall-mounting. You may need a straight-slot
screwdriver to secure some cables.

Installing the Monitor

You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-ventilated location
near your computer.
If the monitor will be installed on a:
■ Desktop or table, see "Installing on a Desktop."
■ Wall, swing arm, or other mounting fixture, see "Wall-Mounting the Monitor (Mounting Fixture not Supplied)."
Connect the monitor cables after you have installed the monitor.

Installing on a Desktop

Follow the instructions for your monitor type.
User's Guide

Setting Up the Monitor

3
3–1