Maintenance And Servicing; Cleaning, Maintenance, And Lubrication; Please Read The Following Carefully; Operating Instructions - Chicago Electric 66439 Set Up And Operating Instructions Manual

operating inStructionS

read the entire important
SaFetY inFormation section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
1. Plug the Light into a standard 120V
grounded, electric outlet.
2. Push the On/Off switch on the back
of the light.
3. warning! Keep the light away
from combustible objects. the
light and housing will get hot
enough to start a fire.
4. to change the height:
the Height Adjustment Knobs (39,41),
adjust the height, and retighten the
Knob.
5. To turn off, push the On/Off switch.
6. To prevent accidents; disconnect its
power supply after use. Allow the
Lights to cool. Clean, then store the
Light indoors out of children's reach.

pleaSe read the Following careFullY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 66439 For technical questions, please call 1-800-444-3353.
1.
loosen one of
2.
3.
maintenance and
SerVicing
risk of serious
warning
personal injury
from accidental starting or
electric shock. turn the
power Switch of the light to
its "oFF" position and unplug
the light from its electrical
outlet before performing any
inspection, maintenance, or
cleaning procedures.
cleaning, maintenance, and
lubrication
BeFore each uSe,
general condition of the Light. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
aFter uSe, allow the unit to cool
and clean external surfaces of the
Light with clean, moist cloth.
warning! if the supply cord of
this light is damaged, it must be
replaced only by a qualified ser-
vice technician.
inspect the
Page 9