CHAINTECH 9EJL4 User Manual page 23

3. Typematic Delay (Msec)
The typematic delay sets how long after you press a key that a character begins
repeating.
Security Option:
The Supervisor and/or User Password functions shown in Figure 3-1 must be set to
take advantage of this function. See Section 3.11 for password setting information.
When the Security Option is set to System, a password must be entered to boot the
system or enter the BIOS setup program. When the Security Option is set to Setup, a
password is required to enter the BIOS setup program.
APIC Mode:
In order to comply with PC2001 standard, the system is designed to run in APIC
(Advanced Programmable Interrupt Controller) mode. Enabling APIC mode
will increase the available IRQ resources for the system. Available options are
[Enabled] and [Disabled].
MPS Version Control For OS:
This item allows you to select which MPS (Multi-Processor Specification) version
to be used for the operating system. You need to select the MPS version which is
supported by your operating system. To find out which version to use, consult the
vendor of your operating system. Available options are [1.4] and [1.1].
OS Select (For DRAM >64MB):
If your system's DRAM is larger than 64MB and you are running OS/2, select OS/2
as the item value. Otherwise, set the item value to Non-OS/2 for all other operating
systems.
Small Logo (EPA) Show:
This setup allows photo that is EPA. Logo.
Show POST CODE
Enabling this function can show POST error code on the screen before proceeding to
system's operating system.
Chapter 3
19